Types of lenses
- OKVision® FUSION NEW Multifocal lenses
Silicone hydrogel MULTIFOCAL soft contact lenses with aspherical design. - Hydrogel colored soft contact lenses with
layer-by-layer dye application
- OKVision® PRIMA BIO Bi-focal design 1-Day daily replacement lenses
- Matrix retention of water within the lens material.
- Low dehydration due to the presence of a biocompatible GMA polymer in the lens, simulating the mucin layer of the tear film.
- Adding hyaluronic acid to the isotonic buffer solution in which the lens is stored.
- Higher quality vision! The curvature of the lens surface gradually decreases as the contact lens moves toward the periphery, neutralizing the spherical aberrations inherent in the lens and eye.
- The design of the OKVision® PRIMA BIO Bi-focal design lenses was developed on the basis of the biocompatible contact lens OKVision® PRIMA BIO, which has proven itself on the Russian market for seven years.
- The combination of OKVision® DLC-Technology with the best properties of OKVision® PRIMA BIO has made it possible to create soft contact lenses that simultaneously provide high visual acuity and induce peripheral relative myopic defocus to slow the progression of myopia.
- Low dehydration due to the presence of a biocompatible GMA polymer in the lens, simulating the mucin layer of the tear film.
- Adding hyaluronic acid to the isotonic buffer solution in which the lens is stored.
- OKVision® PRIMA BIO SPHERICAL LENSES
The 3D-not dry system moisturizing system includes hyaluronic acid, which provides a feeling of ideal comfort during the entire period of wearing the lenses.
Biocompatibility
Biocompatible Hyoxyfilcon A material, composed of 2-HEMA hydrogel and GMA (glycerol methacrylate), contributes to incredible resistance to lens dehydration (less than 1% moisture throughout the day).
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
Wearing mode: daytime
Material: Hioxifilcon A
Manufacturing method: Cast mold
Water content: 55%
Oxygen permeability (Dk/t): 34.5×10 -9
Curvature: 8.6/8.8 mm
Diameter: 14.2 mm
Refraction range (Pwr, D):
8.6: from -0.50 to -6.00 step 0.25; from -6.50 to -20.00 step 0.50
8.8: from -0.50 to -6.00 step 0.25; from -6.50 to -12.00 step 0.50
8.6; 8.8: +0.50 to +8.00 step 0.50
UV protection: UV-A no less than 85%, UV-B no less than 40%
Additional humidification system: 3D
Rounded edge
Wearing mode: daily / flexible extended wear possible
Packing: 6 blisters
Replacement mode: 1 month
- OKVision® PRIMA BIO TORIC LENSES
The 3D-not dry system moisturizing system includes hyaluronic acid, which provides a feeling of ideal comfort during the entire period of wearing the lenses.
Biocompatibility
Biocompatible Hyoxyfilcon A material, composed of 2-HEMA hydrogel and GMA (glycerol methacrylate), contributes to incredible resistance to lens dehydration (less than 1% moisture throughout the day).
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
Material: Hioxifilcon A
Manufacturing method: Cast mold
Water content: 55%
Oxygen permeability (Dk/t): 34.5×10 -9
Curvature: 8.6 mm
Diameter: 14.2 mm
Refraction range (Pwr, D):
sph: 0.00 to -10.00 0.50
cyl step: -0.75/-1.25/-1.75/-2.25
ax: 10, 20, 80, 90, 100, 160, 170, 180°
sph: +0.50 to +6.00 step 0.50
cyl: -1.25 / -1.75 / -2.25
ax: 10, 20, 170, 180°
On request:
sph: 0.00 to -10.00 increments 0.50
cyl: -0.75/-1.25 /-1.75 / -2.25
ax: 30, 40, 50 , 60, 70, 110, 120, 130, 140, 150°
sph: +0.50 to +6.00 step 0.50
cyl: -0.75/-1.25 /-1.75 / -2 .25
ax: 10-180° (excl. cyl -1.25 / -1.75/ -2.25 ax 10, 20, 170, 180°)
Cylinder optical power: 0.75D / 1.25D / 1.75D / 2.25D
Axis: 10° to 180° (10° steps)
UV protection: UV-A no less than 85%, UV-B no less than 40%
Additional humidification system: 3D
Rounded edge
Wearing mode: daily / flexible extended wear possible
Packing: 1 blister or 6 blisters
Replacement mode: 1 month
The lenses are made of biocompatible Hyoxyfilcon A material, consisting of 2-HEMA and GMA hydrogel, which provides high resistance to dehydration. The 3D humidification system allows you to comfortably wear lenses throughout the day.
High clarity of vision (control of aberrations)
Consistent visual clarity at any distance.
Improved peripheral visual field capability.
Minimal refractive astigmatism.
High contrast sensitivity.
High visual acuity.
Compensation of astigmatism with toric lenses up to −3.5 diopters.
- OKVision® FUSION NEW lenses
OKVision® FUSION NEW are made of the latest generation silicone hydrogel material Innofilcon A, balanced in hydrophilicity, oxygen permeability and elasticity modulus.
UV protection
The lenses protect the eyes from UV-A and UV-B rays, provide sufficient saturation of the cornea with oxygen and comfort when wearing.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
Material: Innofilcon A
Wearing mode: daytime (flexible prolonged wear possible)
Manufacturing method: Cast mold
Water content: 45%
Oxygen permeability (Dk/t): 125×10 -9
Curvature: 8.6 mm
Diameter: 14.2 mm
Refraction range (Pwr, D):
from -0.50 to -6.00 step 0.25
from -6.50 to -12.00 step 0.50
from +0.50 to +8.00 step 0.50
UV protection: yes
Rounded edge
Wearing mode: daytime.
Packing: 6 blisters.
Replacement mode: 1 month.
Lenses are made of silicone hydrogel
Sufficient saturation of the cornea with oxygen.
Comfortable stay in lenses throughout the day.
The high modulus of elasticity of the material protects the shape of the lens, making it easy to remove and put on.
OKVision® PRIMA BIO TORIC lenses
Effective hydration
The 3D-not dry system moisturizing system includes hyaluronic acid, which provides a feeling of ideal comfort during the entire period of wearing the lenses.
Biocompatibility
Biocompatible Hyoxyfilcon A material, composed of 2-HEMA hydrogel and GMA (glycerol methacrylate), contributes to incredible resistance to lens dehydration (less than 1% moisture throughout the day).
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
Comfortable wearing throughout the day thanks to the 3D humidification system
OKVision® FUSION NEW Toric Lenses
Unique lens material
OKVision® FUSION NEW Toric is made of the latest generation silicone hydrogel material Innofilcon A, balanced in hydrophilicity, oxygen permeability and elasticity modulus.
UV protection
The lenses protect the eyes from UV-A and UV-B rays, provide sufficient saturation of the cornea with oxygen and comfort when wearing.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
Lenses are made of silicone hydrogel
Effective hydration
The 3D-not dry system moisturizing system includes hyaluronic acid, which provides a feeling of ideal comfort during the entire period of wearing the lenses.
Biocompatibility
Biocompatible Hyoxyfilcon A material, composed of 2-HEMA hydrogel and GMA (glycerol methacrylate), contributes to incredible resistance to lens dehydration (less than 1% moisture throughout the day).
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
- Material: Hioxifilcon A
- Manufacturing method: Cast mold
- Water content: 55%
- Oxygen permeability (Dk/t): 34.5×10 -9
- Curvature: 8.6 mm
- Diameter: 14.2 mm
- Refraction range (Pwr, D):
- sph: 0.00 to -10.00 0.50
- cyl step: -0.75/-1.25/-1.75/-2.25
- ax: 10, 20, 80, 90, 100, 160, 170, 180°
- sph: +0.50 to +6.00 step 0.50
- cyl: -1.25 / -1.75 / -2.25
- ax: 10, 20, 170, 180°
- On request:
- sph: 0.00 to -10.00 increments 0.50
- cyl: -0.75/-1.25 /-1.75 / -2.25
- ax: 30, 40, 50 , 60, 70, 110, 120, 130, 140, 150°
- sph: +0.50 to +6.00 step 0.50
- cyl: -0.75/-1.25 /-1.75 / -2 .25
- ax: 10-180° (excl. cyl -1.25 / -1.75/ -2.25 ax 10, 20, 170, 180°)
- Cylinder optical power: 0.75D / 1.25D / 1.75D / 2.25D
- Axis: 10° to 180° (10° steps)
- UV protection: UV-A no less than 85%, UV-B no less than 40%
- Additional humidification system: 3D
- Rounded edge
- Wearing mode: daily / flexible extended wear possible
- Packing: 1 blister or 6 blisters
- Replacement mode: 1 month
Comfortable wearing throughout the day thanks to the 3D humidification system
- Matrix retention of water within the lens material.
- Low dehydration due to the presence of a biocompatible GMA polymer in the lens, simulating the mucin layer of the tear film.
- Adding hyaluronic acid to the isotonic buffer solution in which the lens is stored.
- Consistent visual clarity at any distance.
- Improved peripheral visual field capability.
- Minimal refractive astigmatism.
- High contrast sensitivity.
- High visual acuity.
- Compensation of astigmatism with toric lenses up to −3.5 diopters.
OKVision® FUSION NEW Toric Lenses
Unique lens material
OKVision® FUSION NEW Toric is made of the latest generation silicone hydrogel material Innofilcon A, balanced in hydrophilicity, oxygen permeability and elasticity modulus.
UV protection
The lenses protect the eyes from UV-A and UV-B rays, provide sufficient saturation of the cornea with oxygen and comfort when wearing.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
- Material: Innofilcon A
- Wearing mode: daytime (flexible prolonged wear possible)
- Manufacturing method: Cast mold
- Water content: 45%
- Oxygen permeability (Dk/t): 125×10 -9
- Curvature: 8.6 mm
- Diameter: 14.2 mm
- Refraction range (Pwr, D):
- plano, -10.00 to +6.00 (0.50 step)
- Cylinder optical power:
- -0.75 D / -1.25 D / -1.75 D / -2.25 D
- on request: -2.75 D
- Axis:
- 10° to 180° (10° steps)
- UV protection: yes
- Rounded edge
- Wearing mode: daytime.
- Packing: 6 blisters.
- Replacement mode: 1 month.
Lenses are made of silicone hydrogel
- Sufficient saturation of the cornea with oxygen.
- Comfortable stay in lenses throughout the day.
- The high modulus of elasticity of the material protects the shape of the lens, making it easy to remove and put on.
OKVision® FUSION NEW Multifocal lenses
The aspherical High Definition Control design compensates for spherical aberrations, promotes stabilization of peripheral vision and high visual acuity even in the dark.
The latest generation silicone hydrogel material, Innofilcon A, perfectly balanced in hydrophilicity, oxygen permeability and elastic modulus, promotes the penetration of oxygen to the cornea directly through the lens and saturates it with oxygen by 98%.
The optimal content of the hydrophilic component in the lenses perfectly moisturizes the eyes and prevents the deposition of deposits on the surface of the contact lens.
The rounded edge of the lens does not disrupt tear exchange and does not sink into the conjunctiva.
MULTIFOCAL SOFT CONTACT LENSES FOR MULTI-TASKING MODERN PEOPLE
The latest generation silicone hydrogel material, Innofilcon A, perfectly balanced in hydrophilicity, oxygen permeability and elastic modulus, promotes the penetration of oxygen to the cornea directly through the lens and saturates it with oxygen by 98%.
The optimal content of the hydrophilic component in the lenses perfectly moisturizes the eyes and prevents the deposition of deposits on the surface of the contact lens.
The rounded edge of the lens does not disrupt tear exchange and does not sink into the conjunctiva.
MULTIFOCAL SOFT CONTACT LENSES FOR MULTI-TASKING MODERN PEOPLE
- Ideal for patients with the first signs of decreased near vision after 35 years.
- Equally impeccable quality of visual perception at all three distances: far, mid-distance and near.
- Stable vision in any lighting, even in the dark: in the office, in the car, on the street
- A softer transition* of optical power from the center to the edges of the lens guarantees clear vision and maximum visual comfort at each intermediate segment.*
- Sufficient saturation of the cornea with oxygen.
- Comfortable stay in lenses throughout the day.
- The high modulus of elasticity of the material protects the shape of the lens, making it easy to remove and put on.
- Material: Innofilcon A
- Manufacturing method: Cast mold
- Water content: 45%
- Oxygen permeability (Dk/t): 125×10 -9
- Curvature: 8.6 mm
- Diameter: 14.2 mm
- Refraction range (Pwr, D):
- plano;
- from -0.50 to -5.00 (step 0.25); -5.50 to -8.00 (0.50 steps) add: 1.00; 1.50; 2.00; 2.50 D
- from +0.50 to +6.00 step 0.50 add: 1.00; 1.50; 2.00; 2.50D
- Addition +1.0 D, +1.5 D, +2.0 D, +2.5 D
- UV protection: yes
- Rounded edge
- Wearing mode: daytime (flexible prolonged wear possible)
- Packing: 6 blisters
- Replacement mode: 1 month
OKVision® FUSION COLOR
A completely new eye color
A unique manufacturing technology using a layer-by-layer method of applying dye inside the lenses. This allows you to radically change the color of even the darkest eyes, while maintaining the natural depth of your gaze.
15 colors and shades of lenses
A variety of colors and shades will allow you to choose the desired color. Enhance your natural eye color or radically change it to create a new look. Primary colors: green, blue, brown, violet, gray, mix.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
OKVision® FUSION color monthly
A completely new eye color
A unique manufacturing technology using a layer-by-layer method of applying dye inside the lenses. This allows you to radically change the color of even the darkest eyes, while maintaining the natural depth of your gaze.
15 colors and shades of lenses
A variety of colors and shades will allow you to choose the desired color. Enhance your natural eye color or radically change it to create a new look. Primary colors: green, blue, brown, violet, gray, mix.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
Using a layer-by-layer method of applying dye inside the lenses at its inner surface allows you to radically change the color of the darkest eyes, while maintaining the natural depth of look
A completely new eye color
A unique manufacturing technology using a layer-by-layer method of applying dye inside the lenses. This allows you to radically change the color of even the darkest eyes, while maintaining the natural depth of your gaze.
15 colors and shades of lenses
A variety of colors and shades will allow you to choose the desired color. Enhance your natural eye color or radically change it to create a new look. Primary colors: green, blue, brown, violet, gray, mix.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
- Wearing mode: daytime
- Material: Terpolymer
- Manufacturing method: combined - one side is turned, the other side is molded
- Water content: 45%
- Oxygen permeability (Dk/t): 27.5 x 10⁻⁹
- Curvature: 8.6 mm
- Diameter: 14.0mm
- Refraction range (Pwr, D): from 0.00 to -10.00 step 0.50 - two-tone and mix.
- Plano; from -1.00 to -6.00 step 0.50 - three-tone (blu 3, brown 3, green 3, violet 3)
- Rounded edge
- Colors: green 2, green 3, green-yellow, turquoise, blue 2, blue 3, brilliant blue, sapphire blue, blue-violet, brown 2, brown 3, velvet black, violet 2, violet 3, gray 2
- Wearing mode: daytime
- Packing: 2 blisters
- Replacement mode: 3 months
OKVision® FUSION color monthly
A completely new eye color
A unique manufacturing technology using a layer-by-layer method of applying dye inside the lenses. This allows you to radically change the color of even the darkest eyes, while maintaining the natural depth of your gaze.
15 colors and shades of lenses
A variety of colors and shades will allow you to choose the desired color. Enhance your natural eye color or radically change it to create a new look. Primary colors: green, blue, brown, violet, gray, mix.
Safety edge of the lens
It does not disrupt the exchange of tears in the sublens space, does not plunge into the conjunctiva, since it is parallel to it.
Lens characteristics
- Wearing mode: daytime
- Material: Terpolymer
- Manufacturing method: Cast molding
- Water content: 45%
- Oxygen permeability (Dk/t): 27.5 x 10⁻⁹
- Curvature: 8.6 mm
- Diameter: 14.0mm
- Refraction range (Pwr, D): plano; from -1.00 to -8.00 step 0.50
- Rounded edge
- Colors: Cobalt Blue, Azure, SkyBlue, Lime, Windsor Violet, Ivory Black, Verde, Cobalt Violet cobalt), Rain (Rain), Сoffee (Coffee), Amber (Amber)
- Wearing mode: daytime
- Packing: 2 blisters
- Replacement mode: 1 month
Using a layer-by-layer method of applying dye inside the lenses at its inner surface allows you to radically change the color of the darkest eyes, while maintaining the natural depth of look
| | Leave a request Leave a request and we will contact you |
© 2025 All Right Reserved.
www.lumosvizion.com/
www.lumosvizion.com/
Tbilisi, Davit Tavkhelidze, 1
Opening Hours
Mon - Fri: 10:00 am – 8:00 pm
Sat-Sun: 10:00 am – 7:00 pm
Opening Hours
Mon - Fri: 10:00 am – 8:00 pm
Sat-Sun: 10:00 am – 7:00 pm
